Qualcast XSZ51C-SD Assembly Manual Download Page 9

  

  

9

8

  

  

Customer Helpline 

01904 727500

www.gardenservicecentre.co.uk

Customer Helpline 

01904 727500

www.gardenservicecentre.co.uk

Step 2 - Filling with Engine Fuel

Preparing to Operate the Lawnmower

Step 1 - Setting the Cutting Height

Operating the Lawnmower

THROTTLE -LEVER 

RABBIT

STOP/START-LEVER 

CLOSED

PULL STARTING 

HANDLE

PROPULSION-

LEVER CLOSED

   

1

2

3

4

WARNING! 

Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames or sparks 

in the area where the engine is refueled or where petrol is stored. Avoid repeated or prolonged 

contact with skin or inhalation of vapour.

CAUTION!

 

Petrol is highly flammable and extreme precaution must be taken when handling or working with 

it. Keep out of reach of children.

1 Clean the area around the petrol filler cap before removing the cap. Remove the warning tag, check 

the fuel level.

2 Refill the tank if the fuel level is low. Always use clean, fresh unleaded petrol. Purchase fuel in 

quantities that can be used within 30 days. Never mix oil with petrol.

3 Refuel carefully to avoid overfilling or spilling fuel to allow for expansion. There should be no fuel in 

the filler neck.

4 Clean up any overflow or splashes of petrol before starting the engine.

5 Tighten the filler cap after filling, finger tight only.

NOTE! 

The Qualcast 51cm Self Drive Lawnmower has a maximum fuel capacity of 800ml.

WARNING!

 

- The blade can cause serious injury. Before adjusting the mower height, stop the engine and wait 

for the mower blade to stop completely.

Step 2 - Starting the Engine

WARNING!

 

- Do not operate the machine in enclosed or poorly ventilated areas as the exhaust gas contains 

toxic substances. Keep hands, feet, hair and clothing away from all the moving parts of the 

machine. The exhaust and other parts of the machine will become hot during use. Make sure that 

the blade is securely fastened before starting the engine.

1 Pull the lever towards the wheel, then move it forward or backward to adjust the cutting height. 

2 Move it to any one of the 7 positions for the desired cutting height.

3 Return lever into securing plate.

NOTE!

 Never use the lowest cutting height for the first cut of the season or in drought conditions. 

Only about one thirds of the grass height should be cut.

1

2

Summary of Contents for XSZ51C-SD
















Reviews: