Qualcast XSZ51C-SD Assembly Manual Download Page 8

  

7

  

Customer Helpline 

01904 727500

www.gardenservicecentre.co.uk

Important - Please read these instructions fully before operating or maintaining

6

Customer Helpline 

01904 727500

www.gardenservicecentre.co.uk

Safety Information

Preparing to Operate the Lawnmower

Step 1 - Filling with Engine Oil

WARNING!

- Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

- Never store the equipment with petrol in the tank inside a building where fumes can reach an 

open flame or spark.

- Allow the engine to cool before storing in any enclosure.

- To reduce the fire hazard, keep the engine, silencer, and petrol storage area free of grass, 

leaves, or excessive grease.

- Check the grass bag frequently for wear or deterioration.

- Replace worn or damaged parts for safety.

- If the fuel tank has to be drained, this should be done outdoors.

Maintenance and Storage

IMPORTANT!

- The following procedures and adjustments must be performed before the engine is started. Do not 

attempt to make any of these adjustments while the engine is running. 

 

Always use high quality detergent oil classified SAE30 oil (or equivalent eg 5W 30, often termed 

as 4 Stroke lawn mower oil). Only use additives recommended by the engine manufacturer. To 

prolong the life of your engine it is important that the oil is changed after the first 5 hours of use. 

Using non-detergent oil can shorten the engine’s service life and using 2-stroke oil will damage 

the engine.

To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled 

with the correct grade of oil and petrol before starting the engine.

- Running the engine with a low oil level will cause engine 

irreparable damage.

Check the engine oil level with the engine stopped and the mower on a level surface.

Remove the oil filler dipstick and wipe oil from it with a clean cloth.

Insert the dipstick into the oil filler neck, but do not screw it in.

Then remove the dipstick and check the oil level. The oil level must be between the Min and Max 

marks on the dipstick. If near the lower level, fill to upper level with the recommended oil (SAE30 or 

equivalent). Do not overfill. Wipe away any spilt oil.

Add Full

Intended Use: 

This mower is designed for domestic lawn mowing only. Use in any other way is considered 

contrary to the intended use. Compliance with the operation, service and repair as specified in this 

handbook also constitute essential elements of the intended use.

Summary of Contents for XSZ51C-SD
















Reviews: