Helpline No. UK 0151 649 1500 / IRE 189 094 6244
09
To install saw chain
1. Spread the chain out in a loop with the
cutting edges (A) pointing CLOCKWISE around
loop (Fig. 9).
2. Slip the chain around the sprocket (B) behind
the clutch (C). Make sure the links fit between
the sprocket teeth (Fig. 10).
3. Guide the drive links into the groove (D) and
around the end of the bar (Fig. 10).
Note:
The saw chain may droop slightly on the
lower part of bar. This is normal.
4. Pull the chain bar forward until the chain is
closely seated. Make sure that all the drive
links are in the groove of the bar.
5
7
6
8
9
10
