Do not use the mower on gradients exceeding 15°for safety reasons.
Take special care when moving backwards and pulling the lawn mower.
Mowing advice
We recommend that you mow in overlapping lines. Only mow with sharp
blades so that the blades of grass do not fray. This can cause grass to turn
yellow. To achieve a good cut, guide the lawn mower in lines that are as
straight as possible. These lines should always overlap by a few centimeters
so that you do not leave any uncut strips.
How often you should mow your lawn depends on how fast the grass is
growing. During the main growth period, mow more frequently if necessary. If
the grass is longer than usual, cut in 2 or more times. This will cause less
stress to both the mower and the grass. Never cut the grass by more than
half its height. Keep the under side of the mower casing clean and remove all
grass deposits from it. Deposits make it more difficult to start the mower and
also adversely affect the mowing quality and the grass collection. Switch off
the motor before you carry out any inspections of the blade. Remember that
the blade will continue to turn for a few seconds after the motor has been
switched off. Never attempt to stop the blade.
Check regularly that the blade is correctly secured, in good condition and
sharp If not, sharpen or replace the blade. If the moving blade strikes an
object, stop the mower and wait until the blade has come to a complete
standstill. Then check the condition of the blade and the blade mounting. If
they are damaged, they must be replaced.
Place the mains lead in loops on the ground near the wall socket. Mow away
from the socket and cable and ensure that the mains lead is always on the
section of lawn that you have already mowed so that you do not run over the
mains lead with the mower. As soon as you see mown grass on the lawn
whilstyou are mowing, the grass collector will need emptying.
Important!
Before you remove the grass collector, switch off the motor and wait until the
blade reaches a standstill.
To remove the grass collector, raise the deflector guard with one hand and