Proper use
The lawn mower if designed for use in private gardens. The machine is to be
used only for its prescribed purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of misuse. Please note that
our equipment has not been designed for use in commercial, trade or
industrial applications. Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equivalent purposes.
Technical data
Voltage: 220-240 V ~ 50 Hz
Power input: 1200W watts
Motor speed: 3500min
-1
Cutting width: 34cm
Cutting height adjustment: 20, 30, 40, 50, 60, 70mm; 6 levels
Volume of grass collector: 35 liters
Wheel size: 140/170mm
LpA sound pressure level: 76 dB(A)
LWA sound power level: 96 dB(A)
Vibration at the handlebars ahv: < 2.03m/s2
Protection class
II
Before starting the equipment
The push handles and the grass collector must be fully assembled before
using the lawn mower. Follow the operating instructions step-by-step and
use the pictures provided as a visual guide to assemble these parts.
Bottom handle support assembly(Fig. 2a)
- Each of the bottom handle supports(10) is attached to the deck using a bolt,
washer and quick release fastener.
- Lock the quick release bottom fastener levers (6) by folding them towards
the bar (10).
These fasteners should be folded in towards the bar using moderate force.
To tighten - turn clockwise or to loosen - turn anticlockwise, before folding them.