Original instructiOns
1600 Watt
Electric rotary Mower
HElPlinE nO 0844 8010979
heavy conditions. When the motor labours
the speed of the motor drops and you will
hear a change in the motor sound, when this
occurs, stop mowing, release the switch lever
and raise the height of cut. Failure to do so
could damage the machine.
MaintEnancE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional
lubrication or maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your
power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working
controls free of dust. Occasionally you may
see sparks through the ventilation slots. This is
normal and will not damage your power tool.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
BlaDE MaintEnancE
(see fig g)
WARNING!
Never carry out any
assembly operations or adjustments
with the power connected to the mower.
Always ensure that the power button is in
the off position and that the power plug is
disconnected from the supply.
Always handle the blade with care - sharp
edges could cause injury - always use safety
gloves.
Follow these procedures to remove and
replace the blade. You will need garden
gloves (not provided) and a spanner wrench
(provided) to remove the blade. Hold the
blade (12) and unscrew the blade bolt
(11) anticlockwise using a spanner wrench.
Remove blade and attach a new one to the
blade bolt.
Ensure that the blade is properly positioned
as seen in Fig G, then firmly tighten the bolt.
do not over tighten.
Renew your metal blade after 50hrs mowing
or 2 years, which ever is the
sooner - regardless of condition.
If the blade is cracked or damaged replace
it with a new one.
G
12
11
stOragE (see fig H)
h
Clean the exterior of the machine thoroughly
using a soft brush and cloth. Do not use
water, solvents or polishes. Remove all grass
and debris, especially from the ventilation
slots.
Turn the machine on its side and clean the
blade area. If grass cuttings are compacted
in the blade area, remove with a wooden or
plastic implement.
Store the machine in a dry place. Do not
place other objects on top of the machine.
