background image

Customer Helpline

 

0344 801 0979

20

ORIGINAL INSTRUCTIONS

Technical Data

Technical Data Table

Voltage

230–240V~50Hz

Power input

450W

No load speed

10000/min

Max. cutting width

30cm

Diameter of line

1.65mm

Line length

 2*5m

Protection class

 /II

Machine weight

3.2kg

Noise And Technical Date                                 

A weighted Sound Pressure  

80.2dB(A) KpA:1.05dB(A)

A weighted Sound Power  

93dB (A) KwA:1.05dB(A)

Guaranteed sound power level  

96dB(A)

Wear ear protection when sound pressure is over                                                                                          80dB(A)
Typical weighted vibration  

3.8m/s

2

   K: 1.5m/s

2

The declared vibration value has been measured in accordance with a standard test method and may be 
used for comparing one product with another. 
The declared vibration value may also be used to evaluate the exposure for the user caused by vibration in 
advance.

WARNING:

 The vibration emission value during actual use of the power tool can differ from the 

declared value depending on the ways in which the tool is used dependant on the following 

examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained 
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions. 

This tool may cause hand-arm vibration syndrome if its use is not adequately managed

WARNING:

 To be accurate, an estimation of exposure level in the actual conditions of use should also 

take account of all parts of the operating cycle such as the times when the tool is switched off and 

when it is running idle but not actually doing the job. This may significantly reduce the exposure level over 
the total working period.

Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10

0

C or less.

Plan your work schedule to spread any high vibration tool use across a number of days

Summary of Contents for GGT450A1

























Reviews: