background image

Important - Please read these instructions fully before starting assembly

6

Customer Helpline 

0845 077 8888

• 

Do not use the trimmer in the rain.

• 

Keep hands and fingers well away from the blade.

• 

Wear work gloves, eye protection, solid shoes and trousers when using this hedge trimmer.

• 

Always grasp both handles when operating the unit.

• 

Remove the battery when you have finished work before cleaning or if you have been interrupted.

• 

This trimmer has been designed to cut soft, new growth and should not be used on tough branches 

hard wood or other material.

• 

Always turn the tool OFF and remove the battery before attempting to fix a jammed blade.

• 

If you are interrupted when operating the trimmer, complete the process and switch OFF before 

looking up.

• 

Never allow untrained users or children to use the trimmer.

• 

Wear goggles. Wear hearing protection.

Due to modern mass production techniques, it is unlikely that your power tool is faulty or that a part is 
missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault 
has been rectified. Failure to do so could result in serious personal injury.

Personal Safety

Unpacking

Safety Information

Summary of Contents for CLHT1851D

















Reviews: