QPRO Technical Data Sheet
Document 1137-0901, REV A
25
8 Frequently Asked Questions
Q:
How do I contact service or a help desk?
A:
Q:
What type of PC do I need to program the QPRO?
A:
To configure the TurnKey application you can use any computer that runs a terminal
emulation program such as HyperTerminal, and at least one available serial port.
For users of QUAKE’s API any Windows computer can be used to set up the API and
Development Environment.
Q:
Can I use any ORBCOMM antenna with the QPRO?
A:
Yes. Any ORBCOMM antenna with 50-ohm impedance can be used with the QPRO.
However, there are great differences in the performance of various antennas and testing
should occur to ensure proper operation for your application needs.
Q:
Can I use any GPS antenna with the QPEO?
A:
QUAKE recommends that the antenna shipped with the Development Kit be used with
the QPRO. This is a 3.3V active antenna with 26-dB gain. The QPRO can utilize a
passive or active 3.3VDC GPS antenna (Active recommended). Active antenna with 20-
50 dB gain @ 3.3 VDC. Max noise figure 1.5 dB. A 5V active antenna will not work with
the QPRO.
Q:
Does QUAKE provide any other products?
A:
Yes. QUAKE offers a variety of products ranging from OEM modules to “Off the Shelf”
and ready to go turn-key products.
Q:
How do I load firmware into the Q4000?
A:
Loading new code is extremely easy with the use of the PC based QUAKE Configuration
Tool (QCT).
Q:
Can I connect the QPRO directly to a vehicle power supply?
A:
Yes. The QPRO is designed to work in most 12 and 24V based vehicles.
Q:
The sensors I want to attach to my modem send out data as an ASCII string over a
serial line. Will the QPRO accept this?
A:
With the use of QUAKE’s Application Programmer’s Interface, the receiving serial data
can be received and used as needed.
C
O
N
F
I
D
E
N
T
I
A
L
In
fo
rm
a
ti
o
n
c
la
s
s
if
ie
d
C
o
n
fi
d
e
n
ti
a
l
-
D
o
n
o
t
c
o
p
y
(
S
e
e
l
a
s
t
p
a
g
e
f
o
r
o
b
lig
a
ti
o
n
s
)