QPRO Technical Data Sheet
Document 1137-0901, REV A
10
manufacturers: Taoglas, Hirschmann Car Communications, and Tyco Electronics.
•
External GSM
o
GSM Serial Port
-
A QPRO that DOES NOT include an internal GSM module has an option
to use an RS-232 serial port to communicate with an external GSM module, or it can be
used as an additional serial port with the use of a custom application. For example, the AUX
Port could be used for an External GSM:
Pins: 5 (Rx), 6 (Tx), and GND (Pin 9, 12, 26, or 35).
Use only approved GSM antennas
3.3
ORBCOMM
•
Internal
o
Performance
Transmit Output Power: 5 watts Minimum, 10 watts Maximum
Sensitivity -123 dBm with typical BER 1x10
-5
o
Features
Uplink (Tx)
•
148-150.05 MHz
•
2400 baud
Downlink (Rx)
•
137-138 MHz
•
4800 baud
Optional antenna detection
•
External
o
MTS Serial Port- The Main Transport Socket port; known as the MTS port, is an RS-232 port
which implements the QUAKE Communications Protocol (QCP). For QPRO models that
support ORBCOMM this port also supports the Orbcomm Serial Interface (OSI).
Pins: 13 (Tx), 14 (Rx), 15 (DSR), 16 (DTR), 17 (DCD), and GND (Pin 9, 12, 26, or
35)
Exceeding an RF input power level of +10dBm may result in damage to the receiver and will void the
warranty.
Do not place ORBCOMM antennas within six feet of each other.
For best results use only approved ORBCOMM antennas
3.4
IRIDIUM-Short Burst Data (SBD)
•
Internal
o
Performance
Transmit Output Power: 2 Watts
o
Features
Uplink (Tx)
•
1616-1626.5 MHz
•
50 ksps
Downlink (Rx)
•
1616-1626.5 MHz
•
50 ksps
C
O
N
F
I
D
E
N
T
I
A
L
In
fo
rm
a
ti
o
n
c
la
s
s
if
ie
d
C
o
n
fi
d
e
n
ti
a
l
-
D
o
n
o
t
c
o
p
y
(
S
e
e
l
a
s
t
p
a
g
e
f
o
r
o
b
lig
a
ti
o
n
s
)
