FAILURE CODE
PROBABLE
FAILURE
THE PROCESS
TO BE DONE
The water level
in your machine
is below heater.
The pressure of
your water
supply may be
low or locking.
Turn on the tap
to the end.Water
may be cut,
check it.If the
problem is still
continuing,your
machine will
automatically
stop after a
while.Unplug
your machine,
turn off the tap
and apply to the
nearest
authorized
service.
The pump has
failed or the
pump filter is
obstructed.
Clean the pump
filter.If the
problem
persists,apply to
the nearest
authorized
service.(*)
There is an
excessive
amount of water
in your machine.
Your machine
will automatically
drain the water.
After your
machine has
completed the
draining
process,shut
down your
machine and
unplug. Close
the tap and
apply to the
nearest
authorized
service.
(*) See the section regarding the maintenance and cleaning of your machine.
31