Quadro Manual I: Installation Guide
Step 3: Registering on Epygi’s Technical Support
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, Quadro16x, 16xi; (SW Version 4.1.x)
41
Fig. I-40: PPP/PPTP Configuration page
If your ISP assigns a dynamic IP address, activate the
Dynamic IP Address
radio button.
Otherwise activate the
Fixed IP Address
radio button and enter the IP address you were
assigned by your ISP.
PPPoA specific
selection is used to choose between manual or default ADSL or G.SHDSL
connection parameters. For
Default
selection, the preconfigured parameter set can be se-
lected from the list. For
Manual
selection, VPI, VCI and Encapsulation parameters should
be specified manually. Configure the corresponding settings according to you ISP adminis-
trator’s requirements.
Keep Connection alive
checkbox enables keeping the connection alive by sending control
packets dedicated for the link state verification.
Click the
Next
button to display the
WAN Interface Configuration
page.
Summary of Contents for Quadro2x
Page 1: ......