Quadro Manual I: Installation Guide
Step 2: Configuring the Quadro
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, Quadro16x, 16xi; (SW Version 4.1.x)
31
WAN Interface Configuration
If your ISP requires a specific MAC address, (for example, for authentication), it can be en-
tered on this page. The required MAC address can be entered into the
User defined
field.
If a specific MAC address is not required, leave the default selection
This device
selected.
Fig. I-28: WAN Interface Configuration page
Use the
MTU
drop down list
to select the maximum packet size on the Ethernet (in bytes).
Click
Next
to display the
DNS Settings
page.
DNS Settings
For DNS, the selection is set to
Dynamically by Provider
. When using a static IP address,
fixed values must be entered.
Fig. I-29: DNS Settings page
The Quadro will suggest the correct settings. If
Dynamically by Provider
is selected, the
DNS server settings will be set automatically whenever a connection to the Internet is es-
tablished.
If
Fixed Nameserver Address
is selected, manually enter the IP addresses provided by
your ISP for the name server and the alternative name server.
Clicking
Next
shows the summary
page of the Internet Configuration Wizard.
Summary of Contents for Quadro2x
Page 1: ......