Quadro DECT-4200, User Manual

Page: 7 / 60

4. Telephoning
Taking a call
Your phone is ringing. Press the call key.
Making a call
Enter the phone number. Delete wrong characters by pressing .
The phone number is being dialled.
☞ You can also press the call key and you will hear the dialling tone.
The entered number will be dialled immediately. It is not possible to
correct wrong digits individually using this dialling procedure.
Ending a call
Press the call key or replace the handset in the base station.
Activating Hands-free
When you are in a call you can switch on/off the loudspeaker
appears in the display when the loudspeaker is on.
Call timer
Your handset automatically times the duration of every call.
Setting the earpiece/loudspeaker volume
During a call you can adjust the volume in 5 levels (if telephoning
“normally“ -> earpiece volume, with hands-free -> loudspeaker volume).
Muting the microphone
During a call you can switch your handset’s microphone off. The display
shows
To unmute press again.
Redial
☞ Your handset saves the last 3 dialled telephone numbers.
Viewing/dialling telephone numbers
The handset is in idle state.
… press repeated (if necessary) until the desired telephone number is
displayed.
… the phone number is being dialled.
☞ Once you already pressed the call key and can hear the dialling tone, the very
last dialled telephone number is dialled by pressing the redial key.
ENGLISH
5