Quadro CTV-63N11 TXT, Service Manual

Page: 26 / 44

CONTROL PANEL BUTTONS
Power Connection
Rear View of the TV Set
(AC 220V
50/60 Hz).
1. Video / Audio input for playback for VCR.
2. Video / Audio output for TV program.
Connect the aerial or cable TV plug to the Antenna Input Socket located at the back of the TV and
connect the cable plug coming out from the TV out socket located at the devices (VCR, DVB, etc.) to this
socket as well.
Video And Audio Input/ Output Terminals
Connections To The Antenna Input Socket
Only use the adaptor supplied with this product, connect the AC plug to the socket at the back of the TV.
This TV must be operated only from the type of power source indicated on the marking label
1. Power Button
2. Power Indicator & Remote Sensor
3. Speakers
4. AV/TV Button
5.
MUTE Button
6. Menu Button
7. Volume Down/Up Button
8. Program Down /Up Button
9. AV In (Option)
AV Out (Option)
YUV (Y, Cb, Cr) In (Option)
Antenna Input Socket (75 ohm)
10. AC Power Cord
11.Side AV In(Option)
S-Video(Option)
Control Location
-26-