QUADRO VEHICLES Qooder, User Manual

Page: 39 / 72

37
4
When topping up, use only
coolant with the specifi cations
listed in the “Products” section in
the “Technical Data” chapter.
Brake oil
The level of the brake fl uid must be
checked through inspection holes on the
tanks, located on the right- and left-hand
sides of the handlebar.
Make sure that the level never drops below
the notch beneath the letter L fi g. 4 on the
tank.
fi g. 4
AIR FILTER
Whenever the brake fl uid
level is at or below the minimum
level, have an authorised Quadro
Vehicles dealer or service centre
top it up.
See an authorised Quadro
Vehicles dealer or service centre
to have the air fi lter replaced.
CLEANING
To keep the scooter looking sharp, regular
cleaning is recommended. In addition to
this always wash it when you have travelled
over unmade roads or used the vehicle in
very dusty environments.
When cleaning the scooter pay the greatest
attention to the warnings given in this
chapter. Non compliance with certain
instructions could nullify the warranty.
Ensure that the engine is off before
cleaning the scooter.
Proceed as follows to clean the scooter:
•
remove any dirt from the underbody
using a sponge with a mixture of
water and neutral detergent specifi -
cally for washing vehicle bodywork;
•
rinse thoroughly with water in order
to remove any detergent residue;
•
dry the surfaces with a chamois
leather being particularly careful to
get at the hidden places where water
might accumulate;
•
clean the plastic parts with a solu-
tion of a special detergent and water,
applying it with a soft cloth, then
rinse with clean water;
•
wash the seat with a special product
for the cleaning and care of leather;
•
wash the rims with a degreasing
product in the ways and with the
acting times indicated by the man-
ufacturer.
For a better shine of the painted parts,
use non-abrasive polishing products for
bodywork.
When washing the mechanical parts
of the engine, use specifi c degreasing
products, following the manufacturer's
instructions