QUADRO VEHICLES Qooder, User Manual

Page: 25 / 72

2
23
km km
B A
TRIP TRIP
AM AM
E F
5
3
1
8
6
4
2
9
7
ON-BOARD COMPUTER
fi g. 11
1 - Odometer function (total mileage)
2 - Trip Computer function (A, B)
3 - Mileage indicator (total, trip A, trip B)
4 - Clock (AM, PM mode)
5 - Temperature indicator (°C, °F)
6 - Fuel level gauge
7 - Indicator light not active on this model
8 - Seat open warning light
9 - Low temperature (ice hazard) warning light
Trip Computer function
Press the ADJ button to view the odometer,
Trip A, Trip B function.
Each press of the ADJ button
selects the next function.
Trip Computer Reset
Select the required Trip Computer function
(A or B) and hold down the ADJ selection
button for around 3 seconds.
Clock setting
In Odometer mode, press and hold the
MODE and ADJ selection buttons together
for around 2 seconds.
The hours will begin to fl ash.
In order to set the clock:
1. press the ADJ selection button to in-
crease the hours;
2. press the MODE selection button to
change to set the minutes;
3. press the ADJ selection button to in-
crease the minutes;
4. press the MODE + ADJ selection but-
tons to exit time setting mode.
Air temperature unit of measurement
In Odometer mode, press the MODE se-
lection button to switch between °C and °F.
Each press of the MODE
button selects the next unit of
measurement.