background image

INTRODUCTION

TO THE PURCHASER

This new attachment was carefully designed to give years of dependable service. This manual has been provided to assist in the safe 

operation and servicing of your attachment.

NOTE

: All photographs and illustrations in the manual may not necessarily depict the actual models or attachment, but are intended for reference

only and are based on the latest product information available at the time of publication.

NOTE

:  It is possible that certain parts are pre-assembled. We included the plans concerning these assemblies all the same as an indication. 

The illustrations should be used as a reference.

Familiarize yourself fully with the safety recommendations and operating procedures before putting the machine to use.

Carefully read, understand and follow these recommendations and insist that they be followed by those who will use this attachment.

THIS SAFETY ALERT SYMBOL IDENTIFIES AN IMPORTANT SAFETY MESSAGE IN THIS MANUAL

THAT HELPS YOU AND OTHERS AVOID PERSONAL INJURY OR EVEN DEATH. DANGER, WARNING

AND CAUTION ARE SIGNAL WORDS USED TO IDENTIFY THE LEVEL OF HAZARD. HOWEVER,

REGARDLESS OF THE HAZARD, BE EXTREMELY CAREFUL. 

DANGER

: Signals an extreme hazard that will cause serious injury or death if recommended precautions are not followed.

WARNING

: Signals a hazard that may cause serious injury or death if recommended precautions are not followed.

CAUTION

: Signals a hazard that may cause minor injury if recommended precautions are not followed.

In this manual, right and left sides are determined by sitting on the seat of the vehicle facing forward.

If warranty repairs are required please present this registration booklet and original sales invoice to your selling dealer for warranty service.

THIS MANUAL SHOULD BE KEPT FOR FUTURE REFERENCE..

SERIAL NUMBER:

PURCHASE DATE :

6

Summary of Contents for Q-LOCK































Reviews: