3
PARTS LIST:
A) Power Tap Harness
QTY 1
REQUIRED TOOLS:
Safety Glasses
Forked Clip/Trim Removal Tool
Ratchet
7mm Socket
Phillips Screwdriver
A
Quadratec 12 Volt Power Adapter Harness Parts & Tools:
Put on safety glasses. Using a trim clip
removal tool gently remove the dash top
panel. (FIG1) There are clips at the back
and then it will lift off toward the rear of
vehicle.
Disconnect the compass module harness
from the top panel. (FIG 2)
FIG1
FIG2
For ’07-’10 JK Wrangler:
For ’97-’06 TJ Wrangler:
Put on safety glasses. Gain access to the
back of lower dash with cigarette lighter
plug and connect as shown on later
model instructions (see below).
