5
Check to make sure your rack is cen-
tered to your liking and now you may
tighten all M8 hex head hardware
through the rack and brackets using a
13mm socket and box end wrench.
Installation is now complete.
Once you have the rack in its desired
location start by snugging the main
brackets to the hard top. Bring the
brackets clamp side mounting hardware
just tight enough so it can still slide in
the slots. (FIG 11)
Now snug the top mounting stud using
a 13mm deep socket. (FIG 12) Lastly
tighten the side mounting bolts using a
13mm socket.
Installation Instructions:
FIG 11
FIG 11
FIG 12
FIG 12
RESULTS
RESULTS
Q_ROOFBSKT_BRKT_JK_92034_1091_6PG_A4.indd 5
Q_ROOFBSKT_BRKT_JK_92034_1091_6PG_A4.indd 5
8/31/20 3:18 PM
8/31/20 3:18 PM
