The Trusted Source
®
3
Step Four: Install Arm to Bracket
Reinstall the mirror arm and bushing
and secure it using the threaded adjust-
ment knob and washer. Snug the knob
so that the mirror arm is secure but still
allows for some adjustment. Install the
mirror head using the provided hard-
ware. Refer to pictures for Round and
Square mirror installation. For Round
head, use 11mm and 12mm wrenches to
tighten. On Square head mirrors, use (2)
12mm Wrenches. Mirror head tension
can be adjusted using the three phillips
head screws on the back side of the
mirror heads (FIG5).
DO NOT OVER TIGHTEN. The mirror
should not be so tight that it cannot be
adjusted. Adjust mirror then check and
snug all fasteners. Repeat steps for the
passenger side mirror.
When mirrors are not in use, such as
when doors and stock mirrors are rein-
stalled, the provided wingnut should
used to keep Mirror, mirror arm, knob,
and bushing together for storage. (FIG6)
Round Head Mounting
Figure 6
Square Head Mounting
12mm
11mm
12mm
Figure 4
Figure 5
Q_QUIK_REL_MIR_13111_041X_A4 4/30/14 11:17 AM Page 3
04302014111756
