Mount the vacuum canister with the in-
cluded M6 x 30 bolts, M6 washers and
nuts on the bottom as shown using a
10mm socket and wrench. (FIG 17)
Carefully route the hoses best as possi-
ble and reconnect them to the canister.
Loosely install the over rider support
bracket to the outside of frame rails
using M10 x 20 Bolts, fender washers
and nut plates with tether. (FIG 18)
The Trusted Source
®
7
Loosely install M10 x 20 Bolts and
fender washers through the winch plate
and into the nut plates using a 17mm
socket. (FIG 15)
Loosely install M10 x 20 Bolts and
fender washers through the winch plate
and into the nut plates using a 17mm
socket. (FIG 16)
JK Front Bumper Installation:
FIG15
FIG16
FIG18
Loosely secure the support brackets to
the winch mount using (2) 10mm hex
head bolts, 4 washers and 2 nylock nuts.
(FIG 19)
Now tighten the (8) 12mm bolts on
front of frame horns to
64 ft/lbs
. Next,
tighten the M10 inner frame rail bolts
to
38 ft/lbs.
FIG19
FIG17
Q_JK_ALUM_FBMPR_12057_9261_A4.qxp_A4 11/12/19 11:50 AM Page 7