Quadratec 12033.1001 Assembly & Installation Manual Download Page 4

Page: 4 / 4

The Trusted Source

Cargo Rack Assembly & Installation:

Place the 2 connecting plates on either
side of the rack. Secure the plates in

place with 4 M10 carriage bolts along
with the M10 washers and nylock nuts.

Insert the plastic plug into the end of
the tube. At this time, tighten all M10
and M12 fasteners.

Install the rack into your 2” receiver
hitch and secure with the supplied
5/8” receiver pin and cotter pin.

Instructions Part

12999.3019

Q_RACK_LARGE_12033_1001_Layout 1 11/12/14 9:35 AM Page 4

11122014093553

Summary of Contents for 12033.1001

Page 1: ...WARNINGS RISK OF EYE INJURY SAFETY GLASSES MUST BE WORN AT ALL TIMES WHILE INSTALLING OR MAINTAINING THIS PRODUCT TORQUE AND RECHECK FASTENERS AFTER 250 MILES AND FREQUENTLY THEREAFTER INSPECT BUMPER...

Page 2: ...6037 as soon as possible As cargo racks tend to be bulky we suggest you get help for steps involving lifting locating or holding the rack as sembly during installation Thank you again for your purchas...

Page 3: ...argo Rack Kits Contents E C C D F G G H I J B A A PARTS LIST A Cargo Rack Halves QTY 2 B 2 Receiver Tube Assembly QTY 1 C Connecting Plates QTY 2 D M12 x 75 Bolts QTY 3 E M12 Flat Washer QTY 6 F M12 N...

Page 4: ...age bolts along with the M10 washers and nylock nuts Insert the plastic plug into the end of the tube At this time tighten all M10 and M12 fasteners Install the rack into your 2 receiver hitch and sec...