VILLAGE COLLECTION ELECTRIC FIREPLACE/INSERT
10
04/04
4038-827 Rev B
Hearth & Home Technologies Inc.
1445 North Highway, Colville, WA 99114-2124
G. FINISHING
1. Combustible Finishing Material
Materials made of or surfaced with wood, compressed paper,
plant fibers, plastics or any material capable of igniting and
burning, whether flame proofed or not, plastered or
unplastered (this includes drywall).
2. Noncombustible Finishing Material
Materials which will not ignite and burn. Such materials are
those consisting entirely of steel, iron, brick, tile, concrete,
slate, glass or plasters or combinations thereof, or have a UL
Fire rating of Zero (0).
Figure 4 - Finishing Materials
WARNING!
Grilles on this heater cannot, in any way, be covered
as it may create a fire hazard.
3. Finishing Checklist
a.
Power supply service must be completed prior to finishing
to avoid reconstruction.
b.
Grilles and air openings cannot be covered in any
circumstances.
Note:
The heater is a zero clearance fireplace and
may be finished with combustible or noncombustible
finishing materials.
When using paint or lacquer to finish the mantel, they
must be heat-resistent to prevent discoloration.
Note:
Finishing materials are normally installed be-
hind the nailing flanges or up to the sides of the nailing
flanges. Allow room for the front to be added and the
heater to be anchored.
