20
01/21
7082-153K
Shown with trim installed on panel set.
Figure 20.5
Figure 20.4
Back of Top Surround
Back of Side Surround
Screws
Figure 20.3
Figure 20.1
1. Screw panels
together
2. Bend tabs down
1. Screw panels
together
3. Install Cast Trim Header
2. Bend tabs
down
Figure 20.2
- Completed View
D. Surround & Cast Trim Set
1. Remove contents from box being careful not to scratch
or damage the cast trim pieces.
2. Lay the surround set face down on protective covering to
prevent scratching the painted surface.
3. Secure the surround legs to top panel with the
screws provided.
4. Now bend the tabs down toward the backside of the
panel set, 5 on top and 2 on each leg. Leave the panel
set face down
(Figure 20.1)
.
5. Place the corresponding cast trim pieces (2 cast trim
legs and 1 cast trim header) underneath the panel set,
also face down.
6. Place washer provided over tab and secure the trim and
panel together with screw. Continue for all tabs.
7. Secure cast footers with screws.
8. Remove both left and right cast sides from insert
(Figure 20.2)
.
9. Carefully slide surround and trim over the top of the
insert into place matching the mounting holes on the
panel with the mounting holes on the insert. Secure with
screws provided.
E. Surround & Basic Trim Set
1. Secure the top panel to the surround sides with the
screws provided
(Figure 20.3)
.
2. Assemble the trim with the (2) corner brackets
provided
(Figure 20.4)
.
3. Remove the 2 cast sides and slide the assembled trim over
the assembled surround set
(Figure 19.3 on
.
4. Carefully slide surround and trim over the top of the
insert into place matching the mounting holes on the
panel with the mounting holes on the insert. Secure with
screws provided
(Figure 20.5)
.
