3
Quadra-Fire • Sapphire • 7055-116 Rev. D • 6/11
Safety Alert Key:
•
DANGER!
Indicates a hazardous situation which, if not avoided will result in death or serious injury.
• WARNING!
Indicates a hazardous situation which, if not avoided could result in death or serious injury.
• CAUTION!
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
•
NOTICE:
Indicates practices which may cause damage to the fi replace or to property.
- TABLE OF CONTENTS -
Section 1: Listing and Code Approvals
A.
Appliance
Certifi cations ......................4
B.
Glass
Specifi cations ............................4
C.
BTU
Specifi cations ..............................4
D. High Altitude Installations ....................4
E.
Non-Combustible
Materials
.................4
F.
Combustible
Materials
........................4
G. Requirements for the
Commonwealth of Massachusetts ........5
Section 2: Getting Started
A. Design & Installation
Considerations
....................................6
B. Tools and Supplies Needed................6
C. Inspect Appliance & Components .......6
Section 3: Appliance Location & Clearances
A. Selecting Appliance Location..............7
B. Clearances to Combustibles ...............7
Section 4: Termination Locations
A. Vent Termination Minimum
Clearances..........................................8
Section 5: Vent Information
A.
Venting
Components
..........................10
B. Use of Elbows .....................................10
C.
Measuring
Standards
..........................10
D. How to Use the Vent Graph ................11
E.
Venting
Guidelines
..............................11
F.
Horizontal
Termination
........................12
G.
Vertical
Termination
............................15
Section 6: Gas Information
A.
Fuel
Conversions
................................23
B.
Gas
Pressures
....................................25
C. Gas Connection.. ................................25
Section 7: Electrical Information
A. Recommendation for Wire ..................27
B. Connecting to the Appliance ...............27
C.
Standing Pilot Ignition System Wiring ..28
Section 8: Appliance Setup
A. Remove Shipping Materials ................29
B.
Accessories
.........................................29
C. Top to Rear Conversion ......................29
D.
Baffl e Installation/Adjustment ..............30
E. Leg Leveling System ...........................30
F.
Brick
Installation
..................................30
G. Positioning the Logs ............................31
H. Mineral
Wool
.......................................31
I.
Embers
................................................31
J. Glass Door Assembly .........................32
K. Optional Blower Installation ................32
L. Intake Fuel Restrictor Adjustment .......34
M.
Shutter
Adjustment
.............................34
Section 9: Operating Instructions
A. Before Lighting Appliance ...................35
B.
Controls
...............................................35
C.
Lighting
Appliance
...............................36
D. After Appliance is Lit ...........................37
E. Frequently Asked Questions ...............37
Section 10: Troubleshooting
...............................38
Section 11: Maintaining & Servicing Appliance
A. Maintenance Tasks ..............................41
Section 12: Reference Materials
A. Appliance Dimension Diagram ...........42
B. Vent Components Diagram ................43
C. Vent Components List ........................44
D. Service Parts List ................................46
E.
Limited
LifetimeWarranty
....................50
F.
Contact
Information
............................52
