manualshive.com logo in svg

Quadra-Fire OYAGEUR-MBK, Owner'S Manual, Page: 8 / 36

Share
Download
Quadra-Fire OYAGEUR-MBK Owner'S Manual Download Page 8

 8 

 

 

 

 

                      

7063-512F 

 

 

 

         February 25, 2016

VOYAGEUR

Surround & Trim Set

Burn Rate Control

ACC Start-up 
Air Control

Door Handle & Fiber Handle

Blower Controls & Snap Disc 
Under Ash Lip

Blower Assembly

User Guide

2 

Operating Instructions

WARNING! DO NOT operate appliance before reading and understanding operating instructions. 
Failure to operate appliance according to operating instructions could cause fi re or injury.  

WARNING

Hot glass will cause burns.

• 

DO NOT

 touch glass until it is cooled

•  NEVER allow children to touch glass
•  Keep children away
•  CAREFULLY SUPERVISE children in same room as appliance.
•  Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other fl ammable materials.

•  Keep clothing, furniture, draperies and other fl ammable materials away.

HOT SURFACES!

Glass and other surfaces are hot during operation AND cool down.

A. Your Wood Appliance

Figure 8.1 - General Operating Parts

If you expect that children may come into contact with this appli-
ance, we recommend a barrier such as a decorative screen.  
See your dealer for suggestions.

Summary of Contents for OYAGEUR-MBK





































Reviews:

No comments