manualshive.com logo in svg

Quadra-Fire OYAGEUR-MBK, Owner'S Manual, Page: 13 / 36

Share
Download
Quadra-Fire OYAGEUR-MBK Owner'S Manual Download Page 13

February 25, 2016 

 

 

 

           7063-512F 

 

 

 

         

                  13

VOYAGEUR 

Ceramic Blanket

Back of Firebox

Baffle Board

Baffle Retainer Bracket

CORRECT POSITION

INCORRECT POSITIONS

J.  Correct Baffl e & Blanket Placement

Ceramic Blanket and Baffl e Board are NOT 

in contact with the back of the fi rebox.

Ceramic Blanket is NOT in contact with the 

back of the fi rebox and NOT even with the 

Baffl e Board in the front.

Ceramic Blanket is bunched up at the back 

of the fi rebox and NOT even with the Baffl e 

Board in the front.

Ceramic Blanket and Baffl e Board MUST be in 

contact with the back of the fi rebox and even with 

each other in the front.

Figure 13.1 - Correct Baffl e and Blanket Positions

Figure 13.2 - Incorrect Baffl e and Blanket Positions

Improper baffl e placement may cause:  

 • 

Overheating 

of 

fi rebox

 

•  Overheating the chimney

Baffl e must be placed properly (see instructions)

Replace baffl e if damaged or missing.

WARNING

Fire Risk

Note:  This are generic drawings and may 
not represent your specifi c model.

NOTE: 

A missing, damaged or improperly positioned baffl e 

is dangerous and may cause damage and poor effi ciency.  
It will also void your warranty.

Ceramic Blanket

Back of Firebox

Baffle Board

Summary of Contents for OYAGEUR-MBK





































Reviews:

No comments