6
7082-132H
July 1, 2015
MT. VERNON E2 INSERT
D. Quick Start Guide
Ru
n
Se
t Up
Pr
im
e
1. Empty
Firebox
2.
Add pellets and close lid
3.
Turn DIAL to OFF
4.
Plug in the appliance
• Exhaust blower will run for about 45 Seconds (
wait for it to stop
before priming)
• Green light will start fl ashing
5.
Ensure thermostat is connected properly per included instructions.
1. After the exhaust blower has stopped; quickly turn the dial from OFF to HI
two times
• The LIGHT will turn solid green and pellets will feed. Wait for 2 minutes
• If the LIGHT did not turn solid green:
- Turn dial back to OFF
- Unplug appliance, plug it back in and repeat
Priming is only needed for fi rst fi re or starting fi re on empty hopper.
HEA
T SETTING
HEA
T SETTING
O
FF
HI
LO
HEA
T SETTING
HEA
T SETTING
O
FF
HI
LO
HEA
T SETTING
HEA
T SETTING
O
FF
HI
LO
2. Choose Setting:
LO – HI*
Green LIGHT will be-
gin fl ashing and stove
will start
It may take as long as 10
minutes to achieve a fi re
in the fi repot. Turning the
knob or thermostat to off
during this time will inter-
rupt the startup process.
*For fi rst fi re,
HHT recommends
running on HI for
fi rst 30 minutes
0
-
1
-2
-3
-4
+1
+2
+3
+
4
ALARM
ON
HEA
T SETTING
HEA
T SETTING
O
FF
HI
LO
1. Press up arrow on thermo-
stat to desired temperature.
*
appliance will not turn on unless target
temperature is minimum of one degree
above room temperature.
Control Panel
Light
Dial
Trim
