Quadra-Fire EXPLR-I-MBK Owner'S Manual Download

Page: 1 / 28

7062-196B

February 25, 2016

EXPLR-I-MBK

EXPLR-I-PBK

EXPLR-I-PDB

EXPLR-I-PFT

EXPLR-I-PMH

Explorer I

Model(s):

O-T L

Tested and

Listed by

Portland

Oregon USA

OMNI-Test Laboratories, Inc.

NOTICE: DO NOT DISCARD THIS MANUAL

Owner’s Manual

Operation & Care

INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.

Contact your dealer with questions on installation, operation, or service.

HOT

SURFACES!

Glass and other surfaces are hot

during operation AND cool down.

Hot glass will cause burns.

•

Do not touch glass until it is cooled

•

NEVER allow children to touch glass

•

Keep children away

•

CAREFULLY SUPERVISE children in same room as
appliance.

•

Alert children and adults to hazards of high temperatures

•

High temperatures may ignite clothing or other
fl ammable materials.

•

Keep clothing, furniture, draperies and other fl ammable
materials away.

WARNING

If the information in these instruc-
tions is not followed exactly, a
fi re may result causing property
damage, personal injury, or death.

• Do not store or use gasoline or other fl am-

mable vapors and liquids in the vicinity of
this or any other appliance.

• Do not over-fi re - If heater or chimney con-

nector glows, you are over-fi ring. Over-fi ring
will void your warranty.

• Comply with all minimum clearances to

combustibles as specifi ed. Failure to
comply may cause house fi re.

WARNING

Fire Risk.

For use with solid wood fuel only.
Other fuels may over-fi re and generate
poisonous gases (i.e. carbon monoxide).

WARNING

NOTE

To obtain a French translation of this manual, please contact
your dealer or visit www.quadrafi re.com

Pour obtenir une traduction française de ce manuel, s’il vous
plaît contacter votre revendeur ou visitez www.quadrafi re.com

Installation and service of this
appliance should be performed by
quali

ed personnel. Hearth & Home

Technologies recommends HHT
Factory Trained or NFI certified
professionals.

Summary of Contents for EXPLR-I-MBK





























Search results

Summary of Contents for EXPLR-I-MBK

Reviews:

Related manuals for EXPLR-I-MBK

Brands by name

Popular brands

Quadra-Fire EXPLR-I-MBK, Owner'S Manual

Search results

Summary of Contents for EXPLR-I-MBK

Reviews:

Related manuals for EXPLR-I-MBK

Brands by name

Popular brands