background image

3

7060-801A

April 26, 2019

Explorer III AU Wood Appliance

The Quadra-Fire Explorer III Australian Wood Appliance is Hardwood Certified. Particulate Emissions equaling 1.1 g/kg 

with a space heating efficiency of 63%.

Report No:

ASFT18014

Report Test Date:

20 December, 2018

Standard:

AS/NZS 4012:4013 (2014)

Overall Average 

Efficiency Burning 

Hardwood (AS/NZS 4012)

63%

Average Particulate 

Emission Factor Burning 

Hardwood (AS/NZS 4013)

1.1 g/kg

Maximum Average 

Heat Output Burning 

Hardwood

11.8kW

Wetback

Wetbacks are NOT an 

approved option and must 

be fitted.

Vent Size:

6 inches

Firebox Size:

3.00 cubic feet

Recommended Wood 

Length:

18 inches

Fuel Orientation:

Side-to-Side

Approved Fuel

Hardwood only with a 

Moisture content less than 

25% (dry basis)

Model:

Explorer II AU Wood Appliance

Laboratory:

Australian Solid Fuel Testing (ASFT)

Report No:

ASFT19001

Report Test 

Date:

10 January, 2019

Type:

Hardwood less than 25% dry basis

Standard:

AS/NZS 2918:2018

A. Appliance Certification

B. BTU & Efficiency Specifications

Important Safety Information

This wood appliance needs periodic inspection and repair for proper operation.

NOTE:

 Hearth & Home Technologies, manufacturer of this appliance, reserves the right to alter its products, their 

specifications and/or price without notice.

Summary of Contents for EXPIII-MBK-APAC

























Reviews: