Quadra-Fire Edge60 Owner'S Manual Download Page 2

Page: 2 / 64

Page

7051-158

April 9, 2009

EDGE 60 Pellet Fireplace

Hearth & Home Technologies welcomes you to our tradition of

excellence! In choosing a Quadra-Fire appliance, you have

our assurance of commitment to quality, durability, and perfor

mance.
This commitment begins with our research of the market,

including ‘Voice of the Customer’ contacts, ensuring we make

products that will satisfy your needs. Our Research and Devel

opment facility then employs the world’s most advanced tech

nology to achieve the optimum operation of our stoves, inserts

and fireplaces. And yet we are old-fashioned when it comes to

craftsmanship. Each unit is meticulously fabricated and surfaces

are hand-finished for lasting beauty and enjoyment. Our pledge

to quality is completed as each model undergoes a quality control

inspection.
We wish you and your family many years of enjoyment in the

warmth and comfort of your hearth appliance.
Thank you for choosing Quadra-Fire.

LOCATION OF CLEARANCE TO COMBUSTIBLES LABEL: Left Hand Panel of Hopper

JAN FEB MAR APR MAY JUNE

7051-159

Made in U.S.A.

Fabriqué par

1445 Highway North, Colville, WA 99114

Fait Aux États-Unis

Manufactured by:

www.quadrafire.com

EDGE 60 PELLET FIREPLACE

Report

Rapport

#061-F-75-6.2

007007

O-T L

Tested and

Listed by

Portland

Oregon USA

OMNI-Test Laboratories, Inc.

JULY AUG SEP OCT NOV DEC

2009
2010
2011

Testing Lab & Report No.

Manufacture Date

Serial Number

LOCATION OF SERIAL NUMBER LABEL: Right Inside Edge of Outer Can

SAFETY LABEL / ÉTIQUETTE DE SÉCURITÉ

Listed Solid Fuel Room Heater/Pellet Type. Also suitable for Mobile Home

Installation. This appliance has been tested and listed for use in Manufactured

Homes in accordance with OAR 814-23-9000 through 814-23-909.

EDGE 60 PELLET FIREPLACE

PREVENT HOUSE FIRES

Install and use only in accordance with manufacturer's installation and

operating instructions. Contact local building or fire officials about

restrictions and inspection in our area.

WARNING: FOR MOBILE HOMES:

Do not install appliance in a sleeping

room. An outside combustion air inlet must be provided. The structural

integrity of the mobile home floor, ceiling and walls must be maintained.

Refer to manufacturer's instructions and local codes for precautions

required for passing chimney through a combustible wall or ceiling.

Inspect and clean vent system frequently in accordance with

manufacturer's instructions.

Components required for all installations: Outside Air Kit, Part Number

OAK-3.

DO NOT CONNECT THIS UNIT TO A CHIMNEY SERVING ANOTHER APPLIANCE.

Use a 3 or 4 inch (76-102mm) diameter type "L" or "PL" venting system.

Tested to: ASTM E1509-04, ULC S628-93, ULC/ORD-C1482-M1990

Room Heating Pellet Burning Type, (UM) 84-HUD FOR USE ONLY WITH

PELLETIZED WOOD. SEE OWNER’S MANUAL FOR OTHER FUEL OPTIONS.

Input Rating: 52,000 BTU/HR.

Electrical Rating: 115 VAC, 60 Hz, Start 5 Amps, Run 1.25 AMPS.

DANGER:

Risk of electrical shock. Disconnect power supply before

servicing.

Replace glass only with 5mm ceramic available from your dealer.

To start, set thermostat above room temperature, the appliance will light

automatically. To shutdown, set thermostat to below room temperature.

For further instruction refer to owner's manual.

Keep viewing and ash removal doors tightly closed during operation.

MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS

7051-148

NE PAS ENLEVER L'ÉTIQUETTE

CAUTION

ATTENTION:

HOT WHILE IN OPERATION DO NOT TOUCH, KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE SKIN BURNS. SEE NAMEPLATE

AND INSTRUCTIONS. Operate this unit with fuel hopper lid closed. Failure to do so may result in emissions products’ combustion

from the hopper under certain conditions. Maintain hopper seal in good condition. Do not overfill hopper.

CHAUD LORS DE L'OPÉRATION. NE PAS TOUCHER. GARDEZ LES ENFANTS ET LES VÊTEMENTS LOIN DE L'ESPACE DÉSIGNÉ DE L'INSTALLATION. LE CONTACT

PEUT CAUSER DES BRÛLURES À LA PEAU. VOIR L'ÉTIQUETTE ET LES INSTRUCTIONS. Opérez cet appareil avec le couvercle de la trémie fermé. Le défaut de ne pas

suivre les instructions peut résulter, sous certaines conditions, en une combustion des émissions des produits venant de la trémie. Ne pas remplir la trémie trop pleine.

ESPACES LIBRES MINIMUM DES MATÉRIAUX COMBUSTIBLES:

A Mur de arrières au poêle:

0 in. (0mm)

B Mur de côté poêle:

0 in. (0mm)

C Surfaces supérieurs à la boutisse

0 in. (0mm)

D Du conduits des combustibles

E Protection du plancer dessus cheminéel: Ne pas requis

A Standoff to Side Walls

0 in. (0mm)

B Standoff to Back Wall

0 in (0mm)

C Top Standoff to Header

0 in (0mm)

D Vent Pipe to Combustible

E Floor Protection under Fireplace

None Required

PRÉVENTION DES FEUX DE MAISON

Installez et utilisez en accord avec les instructions d'installation et d'opération du fabricant.

Contactez le bureau de la construction ou le bureau des incendies au sujet des restrictions et

des inspections d'installation dans votre voisinage. Ne pas obstruez l'espace en dessous de

l'appareil.

AVIS - Pour Les Maisons Mobiles:

Ne pas installer dans une chambre à coucher. Un tuyau

extérieur de combustion d'air doit être installé et ne doit pas être obstrué lorsque l'appareil est

en usage. La structure intégrale du plancher, du plafond et des murs de la maison mobile doit

être maintenue intacte.

Référez vous aux instructions du fabricant et des codes locaux pour les précautions requises

pour passer une cheminée à travers un mur ou un plafond combustibles, et les compensations

maximums.

Inspectez et nettoyez la cheminée fréquemment.

Les composants requis pour tout l'installations. Assemblage d'air extérieur, Numéro de Pièce OAK-3.

Ne pas connecter cet appareil à une cheminée servant un autre appareil.

Utilitsez le système de ventilation de 3 or 4 inch (76-102mm) de diametre de type “L” ou “PL”.

Testé à: ASTM #1509-04, ULC S628-93, ULC/ORD-C1482-M1990 Room Heating. Pellet

Burning Type, UM) 84-HUD POUR USAGE AVEC LES BOULETTES DE BOIS. VOIR LE

MANUAL DU PROPRIÉTAIRE POUR D’AUTRES OPTIONS DE CARBURANT.

Puissance de Rendement: 52,000 BTU/HR

Puissance Électrique: 115 VAC, 60 Hz, Début 5 Amps, Courir 1.25 Amps,

DANGER

: Il y a risque de décharge électrique. Déconnectez le fil électrique de la prise de contact

avant le service. Remplacez la vitre seulement avec une vitre céramique de 5 mm disponible

chez votre fournisseur.

Pour allumer, monter la température du thermostat au dessus de la température de la pièce, le

poêle s'allumera automatiquement. Pour éteindre, descendre la température du thermostat en

dessous de la température de la pièce. Pour des instructions supplémentaires, référez vous au

manuel du propriétaire. Gardez la porte d'ouverture et la porte des cendres fermées

hermétiquement durant l'opération.

Appareil de chauffage de combustible solide/de type de boulettes. Accepté dans

l'installation dans les maisons mobiles. Cet appareil a été testé et enregistré pour l'usage

dans les Maisons Mobiles en accord avec OAR 814-23-9000 jusqu'à 814-23-909.

DO NOT REMOVE THIS LABEL

F Floor Protection Hearth Extension From Door Opening 6 in (152mm)

G Floor Protection to the Side of Door Opening

6 in (152mm)

* Use Pipe Manufacturer’s Listed Clearances, 1 inch

(25mm) Minimum

*Voir le fabricant pour les espaces libres des

conduits enregistré, 1 inch (25mm) minimum

F Portection du plancer agrandissement du foyer à ouverture du port: 6 in (152mm)

G Portection du plancer de côté à ouverture du port:

6 in (152mm)

SAMPLE

Open Front. Serial Number Label located

on right side inside edge of outer can.

Slide fireplace out on the rails. Clearance

to Combustible Label located on left side of

hopper.

Figure 2 - Serial Number Label

Figure 3 - Clearance to Combustibles
Label

Summary of Contents for Edge60

































































Search results

Summary of Contents for Edge60

Reviews:

Brands by name

Popular brands

Quadra-Fire Edge60, Owner'S Manual

Search results

Summary of Contents for Edge60

Reviews:

Brands by name

Popular brands