background image

4.  Baffle and Blanket

The  baffle  board  must  be  in  contact  with  the  mani-

fold  at  the  back  of  the  firebox.    The  ceramic  blanket 

should  lay  on  top  of  the  baffle  board  and  manifold.
The  baffle  protection  channel  should  be  in  position 

and  cover  the  front  of  the  blanket  and  baffle  board.

Figure 3.1  Baffle and Blanket Placement

3.  Chimney Fire

In the event of a chimney fire
•  Have the chimney and adjacent structure inspected by 

qualified professionals. Hearth & Home Technologies 

recommends that NFI or CSIA certified professionals, 

or  technicians  under  the  direction  of  certified 

professionals, conduct a minimum of an 

NFPA 211 

Level 2 

inspection of the chimney.

•  Replace components of the chimney and appliance 

as specified by the professionals.

•  Ensure  all  joints  are  properly  engaged  and  the 

chimney is properly secured.

 WARNING! 

Risk of Fire! A chimney fire can perma-

nently damage your chimney system. Failure to re-

place damaged components and make proper repairs 

can cause a structure fire.

Ceramic  Blanket  and  Baffle  Board  are  NOT  in  contact 

with the back of the firebox.

Ceramic Blanket is NOT in contact with the back of the 

firebox and NOT even with the Baffle Board in the front.

Ceramic Blanket is bunched up at the back of the firebox 

and NOT even with the Baffle Board in the front.

Ceramic Blanket

Back of Firebox

Baffle Board

INCORRECT POSITIONS

WARNING

Fire Risk

Firebox damage due to improper baffle place-

ment is not covered by warranty. Operate the 

wood  burning  appliance  with  the  baffle  in  the 

correct position only.  

Not doing so could result in:
 

•  Reduced efficiency

 

•  Overheating the chimney

 

•  Overheating the rear of the firebox

 

•  Poor performance

Ensure correct baffle placement and replace baffle com-

ponents if damaged or missing.

CAUTION

The baffle boards are FRAGILE.  Use extreme caution when 

loading firewood to prevent:
  •  Cracking, breaking or damaging the baffle boards
DO NOT operate the appliance without baffle and ceramic 

blanket.

CORRECT POSITIONS

Figure 3.2

Ceramic Blanket

Back of Firebox

Baffle Protection 

Channel in position

Baffle Board

8

Quadra-Fire • Adventure-III Owner’s Manual • 4083-900 • Rev D • 09/15

Summary of Contents for Adventure-III

































Reviews: