August
13,
2018 7037-171E
23
4300 Wood Stove Series ACC
Figure 23.1
D. Door Handle Assembly
1. Slide door handle through door.
2.
Install additional washer(s) as shown in
Figure 23.1
3.
Install key in groove.
4.
Align groove in latch cam with key; slide latch cam over
shaft
5.
Install locknut but do not over tighten, the handle needs
to rotate smoothly.
6.
Install fiber handle (
Figure 23.1).
CAUTION!
DO NOT OVER TIGHTEN LOCK NUT. THE
DOOR HANDLE NEEDS TO MOVE SMOOTHLY.
Locknut
Latch Cam
Spacing
Washers
Door Cross
Section
Square Key
Door Handle Shaft
Fiber Handle
E. Baffle Removal
1.
Remove all ash from the firebox, and extinguish all hot
embers before disposal into a metal container.
2.
The baffle board has 2 pieces. With the ceramic blanket
still in place, slide one baffle piece over the top of other
one and pull out top piece through the door opening and
then remove bottom baffle piece (
Figure 23.2).
3.
Remove the ceramic blanket.
4.
Re-install the baffle pieces one piece at a time. Be sure
the baffle boards are even with the front manifold tube
and is resting on all tubes (
Figure 23.4).
5.
To re-install the ceramic blanket, it is easier to fold it
in half first. Place on top of baffle board, open up and
flatten and smooth out the blanket. Re-check the baffle
board for correct positioning (
Figure 23.3).
Figure 23.2 - Baffle
Figure 23.3 - Ceramic Blanket
Figure 23.4
2 pc Baffle Board
Ceramic Blanket on Top
Tube Channels
Baffle Board even with front
tube & resting on all tubes
Burn Rate
Air Control
Automatic
Combustion
Control
