Page 12
7033-277I
July 7, 2011
R
3100 Wood Stove Series (ACC)
A. Hearth Protection Requirements
FLOOR PROTECTION:
Floor protector must be non-com
-
bustible material, extending beneath heater and to the front,
sides and rear as indicated. The floor must be non-com
-
bustible or otherwise adequately protected from radiant heat
given off by the unit and from sparks and falling embers. A
layer of thin brick or ceramic tile over a combustible floor is
not sufficient.
For the Millennium Model In US installations,
it is nec
-
essary to install a floor protector of a minimum of 3/8 inch
(9.5mm) thick metal clad millboard or equivalent a minimum
of 16 inches (406mm) in front of glass and 8 inches (203mm)
to both sides of the fuel loading door. Open the door and
measure 8 inches (203mm) from the side edge of the open
-
ing in the face of the appliance. *
See exception.
16 in. from glass
8 in.
Fuel loading door
4-7/8 in.
3-1/8 in.
31-5/8 in.
minimum
39-5/8 in.
minimum
Must extend 2 in. (51mm) beyond
each side of pipe (shaded area)
203mm (8 in.)
203mm
(8 in.)
203mm
(8 in.)
457mm (18 in.)
1260mm
(49-5/8 in.)
minimum
1041mm (41 in.)
minimum
In Canada,
similar floor protection must be provided 18
inches (457mm) in front and 8 inches (203mm) from the
sides and rear of the stove. *
See exception.
*EXCEPTION:
Non-combustible floor protections must
extend beneath the flue pipe when installed with horizontal
venting and extend 2 inches (51mm) beyond each side.
See Figure 12.4.
USA required
Canada recommended
Figure 12.3
4
Installation
Figure 12.1
Figure 12.2
Figure 12.4
WARNING
Fire Risk.
• Hearth pads must be installed exactly as
specified.
High temperatures or hot embers may ignite
concealed combustibles.
Millennium Model
31-
5/8
in
.
27-
3/8
in
.
31-3/4 in.
38-
15
/16
in
.
3-1
/16
in
.
135
°
opt
ional
cov
erage
51-1/16 in.
USA
USA
CANADA
