May 5, 2011
7039-131H
Page 13
2100 Millennium Wood Stove (ACC)
R
C. Blower (Optional)
1. Remove the 3 bolts (1/4”-20 Phillips head) on the outer
skin at the bottom rear of appliance.
2. Align holes in mounting flange of blower with bolt holes in
appliance. Blower should be positioned at bottom of rear
outer skin as shown in
Figure 13.1
.
3. Re-insert and tighten bolts, securing blower onto outer
wall of appliance.
4. Place the bracket containing the snap disc and magnet
under the bottom left rear corner as shown in
Figure 13.1
.
See page 25
for detailed operating instructions for the
blower and snap disc.
Figure 13.1
Shock Risk
.
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Route cord away from appliance.
• Do NOT route cord under or in front of appliance.
CAUTION
MANUAL: Over-rides the
Snap Disc
AUTO: Fan will turn ON/OFF
Automatically by the Snap Disc
Controls the Fan Speed
Snap Disc
Bracket
with Magnet
MANUAL
FAN
AUTO
LOW
HIGH
OFF
Secure wires
with wire tie
Secure blower
with 3 bolts
13-15/16 in. (355mm)
4-13/16 in.
(122mm)
3-1/8 in.
(80mm)
4-15/16 in.
(125mm)
Figure 13.2 - Blower Housing Dimensions
Summary of Contents for 2100 Millennium
Page 40: ...Page 40 7039 131H May 5 2011 R 2100 Millennium Wood Stove ACC D Homeowner s Notes ...
Page 41: ...May 5 2011 7039 131H Page 41 2100 Millennium Wood Stove ACC R D Homeowner s Notes ...
Page 42: ...Page 42 7039 131H May 5 2011 R 2100 Millennium Wood Stove ACC E Warranty Policy ...
Page 43: ...May 5 2011 7039 131H Page 43 2100 Millennium Wood Stove ACC R ...