quadient IX-7 User Manual Download Page 91

Page: 91 / 380

The system automatically assesses the weight and size of each item and applies

postage as each piece goes along the mail path at high speed.

Run the piece through the mailing system to be printed with the indicia.

How to Use Dynamic Weighing Batch Mode

Dynamic Weighing Batch Mode

In this mode, you place a stack of identical items at the Feeder Entrance. The system

assesses the weight and size of the first item and applies the same postage to all items

at very high speed.

To use Dynamic Weighing Batch Mode:
1.

Tap the Weighing type zone on the home screen.
The Weighing type screen is displayed.

| Page 86 | Jun-22-2021 11:01 |

Processing

Mail

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands