7
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
2.3 Safety Notes
Prior to carrying out any installation, operation, maintenance or servicing
procedures on this machine, ensure you have fully observed and understood all
safety notes detailed in this section.
The following safety notes are given to ensure safe installation, operation,
maintenance and or servicing of this machine.
2.3.1 General Safety Notes
WARNING
• Keep the work area around the machine clean. A minimum one metre of clear
unobstructed space is required around the machine at all times.
• The machine must be used only as intended by the manufacturer and should not
be tampered with or altered in any form.
• The machine must be operated, maintained and or serviced only by trained and
authorised personnel.
• Do not operate the machine unless all of the covers are in place and
undamaged, and all warning labels are in place and legible. If any external
cover is damaged, it must be replaced only by authorised personnel or certified
engineers.
•
All covers contain interlock safety cut-off switches. Do not try to bypass the
interlock safety switches, and do not attempt to operate the machine without
covers, or if any of the interlock safety switches are inoperable.
• Do not wear any loose clothing or jewellery, and long hair must be tied back
or tucked under a hat when working near the machine, as they may become
caught in any one of the moving parts resulting in injury.
• Before any cleaning, maintenance and or servicing, the machine must be
completely isolated from the power source, by switching off the isolator switch
on the rear of the Insert Head and unplugging the mains power cable completely
from the electrical power supply, or switching off the wall isolator switch if fitted.
•
Ensure the machine is clean before use. Wipe off any paper dust built up outside
the cabinets. If paper dust is collecting inside the machine, open the covers and
vacuum it out gently or use an invertible type nonflammable airduster only.
• Although the manufacturer takes care to reduce danger. Please handle steel
sheets with care to avoid any risks of cutting.
•
When the machine is not in use, the mains power cable should be completely
disconnected from the electrical power supply, stored and positioned safely.
