quadient AS-850, User Manual

Page: 57 / 86

SECTION 3
OPERATING PRINTER
57
14. From the “ Advanced Options ” window you can access and adjust the following Printer Preferences.
a. Select your desired Paper/Output settings.
Paper Size: Do NOT change. FlexMail will automatically select
a matching Paper Size, to what was selected for the Project
(Layout).
“ Max Print Area ” may be shown when a “ User defined size ”
was created for the Project (Layout). This is normal.
Copy Count: How many copies of each record you would like
printed.
TIP : Copies can be set in the “Settings” Tab as well.
b. Select your desired Document Options and Printer Features.
Print Optimizations: Enabled, Disabled
Make sure Enabled is selected.
Print inverted: No, Yes
AS-850 (left to right feed model) with AS-850(L2R) Printer Driver
Print inverted: No = “ normal ” – print up-side-down to operator
Print inverted: Yes = “ inverted ” – print right-side-up to operator
AS-850R (right to left feed model) with AS-850(R2L) Printer Driver
Print inverted: No = “ normal ” – print right-side-up to operator
Print inverted: Yes = “ inverted ” – print up-side-down to operator
Resolution: 150, 200, 300, 600 DPI (print quality)
Belt Speed: Low, Medium, Medium High, High
NOTE
: Belt Speed selections are limited by the current Resolution selection.
Do NOT select choices marked with CAUTION symbol.
Resolution Compatible Belt Sped Selections
150 Low, Medium and Medium High, High
200 Low, Medium and Medium High
300 Low, Medium
600 Low
TIP: Compatible Belt Speeds can also be selected at the printer, after sending the job. Pause printer
before selecting a new Belt Speed.
Feed Delay: Feeder pause time (1/10 of a second). 10 = 1 second.
Printer will pause feeder, for set value, between each piece of media that is fed/printed. Use to provide
more dry-time between pieces.
15. Click on “ OK ” to Close the “ Advanced Options ” window.