background image

© 2017 QuadH2O All Rights Reserved

SARAH2O PRO User Manual

25

By using this product, you hereby signify that you have read this disclaimer carefully and that you 
understand and agree to abide by the terms and conditions herein. You agree that you are solely 
responsible for your own conduct while using this product, and for any consequences thereof. You 
agree to use this product only for purposes that are proper and in accordance with all applicable 
laws, rules, and regulations, including international and domestic airspace regulations, and all terms, 
precautions, practices, policies and guidelines DJI has made and may make available.

QuadH2O accepts no liability for damage, injury or any legal responsibility incurred directly or 
indirectly from the use of this product. The user shall observe safe and lawful practices including, but 
not limited to, those set forth in this User Manual.

Storage and transportation

1.  Store the Flight Batteries and remote controller in a cool, dry place away from direct sunlight to 

ensure the LiPo battery does NOT overheat. Recommended storage temperature: between 71° and 
82° F (22° and 28° C) for storage periods of more than three months. Never store in environments 
outside the temperature range of -68° to 113° F (-20° to 45° C).

2.  Do NOT use substances containing alcohol, benzene, thinners or other flammable substances to 

clean or maintain the dome. 

3.  Do NOT store the aircraft in humid or dusty areas.
4.  Detach the gimbal from the aircraft when storing for a long period of time or transporting over long 

distances. Also fit the gimbal dust cap when storing.

5.  Do NOT connect the flight controller to any USB interface that is older than version 2.0. Do NOT 

connect this product to any “power USB” or similar devices.

6.  If supplied, store your aircraft in the Pelican flight case when not in use. 

Summary of Contents for SARAH2O Pro




























Reviews: