QUAD ACCESS MFX-3590, Scanner And Fax Manual

Page: 182 / 218

1
2
3
4
5
6
7
Registering destinations 7-21
Machine settings
„
Setting folders and printers
Register the shared folder and printer to use with the Scan to Printer function.
Item Description
Shared Folder Specify the shared folder to use for the Scan to Printer function. Scanned
document data is saved in this folder, and is then forwarded to the printer by
the Scan to Print Monitor function.
NOTE
• It is necessary to create a Scan to Printer shared folder that is separate from
the folder used for the Scan to Folder function.
• Be sure that the shared folder allows “Full control” at “Permissions for
Everyone” in security setting.
Printer Register the printer.
You can register a printer installed in the computer you are using.
Margin With some printers, the document may be reduced when printed to avoid the
margin where printing cannot be performed. You can register that margin to
prevent the document from being reduced.
For details on the margin value, see the instruction manual for the printer you
are using.
Name This is the button name displayed on the panel.
Up to 24 characters can be entered.
Account Register an account when it is required to access the shared folder.
Password Register a password when it is required to access the shared folder. Only ASCII
characters are available.
1
Start Scan to Print Monitor.
Fore details, see “Starting the Scan to Print Monitor” (page 7-20) .
2
Right-click the task tray icon of the Scan to Print Monitor, and select
“Configuration”.
3
Select the [Folder Settings] tab.