![background image](http://html1.mh-extra.com/html/qu-bit-electronix/octone/octone_manual_3338022004.webp)
Installation
To install, locate 10 HP of space in your Eurorack case and confirm the positive
12 volts and negative 12 volts sides of the power distribution lines. Plug the
connector into the power distribution board of your case, keeping in mind that the
red band corresponds to negative 12 volts. In most systems the negative 12 volt
supply line is at the bottom. The power cable should be connected to the Octone with
the red band facing the bottom of the module.
Specifications
Format:
10 HP Eurorack module
Depth:
40mm (Skiff Friendly)
Max Current:
+12V = 141mA
-12V = 55mA
4