General Functions Overview
1. Mode Toggle:
•
If the
mode toggle
is in the left position, then the Envelope mode is selected.
•
If the
mode toggle
is in the center position, then the Oscillator mode is selected.
•
If the
mode toggle
is in the right position, then the Noise mode is selected.
Note:
By default, envelopes must be triggered via the
trig in
or the
trig button
. To set
Envelope mode to cycle, causing envelopes to retrigger at the end of the decay
segment, press and hold the
trig button
for 2 seconds. Repeat this process
to return to the default setting. When envelopes are set to cycle, their phase
will be reset by inserting a gate signal into
trig in
or by pressing the
trig button
.
2. Nrm/Alt Toggle:
•
When Envelope mode is selected and the
nrm/alt toggle
is in the left position,
envelopes are linear.
•
Envelopes are exponential when the
nrm/alt toggle
is in the right position.
•
When Oscillator mode is selected and the
nrm/alt toggle
is in the left position,
the pitch tracking of this square wave oscillator is 1V/Oct.
•
Pitch tracking of the square wave oscillator is quantized to semitones when the
nrm/alt toggle
is in the right position.
•
When Noise mode is selected and the
nrm/alt toggle
is in the left position, noise
will continuously output.
•
When the
nrm/alt toggle
is in the right position, enveloped noise will output when
the EON's
trig in
receives a gate signal or the
trig button
is pressed.
3. Trig In
:
Threshold 2.5V
•
Trigger input for linear and exponential envelopes in Envelope mode.
•
Trigger input for reset of the envelopes when cycling is activated.
•
Trigger input for reset of the triangle wave LFO in Oscillator mode.
•
Trigger input for enveloped noise in Alternate Noise mode.
6
