150.550UK User Manual
Fixture Cleaning
To clean the fixture:
1.
Disconnect the fixture from power and allow it to cool for at least 10 minutes.
2.
Vacuum or gently blow away dust and loose particles from the outside of the fixture with low-pressure compressed
air.
3.
Clean the surfaces by wiping gently with a soft, clean lint-free cloth moistened with a weak detergent solution. Do not
rub glass surfaces hard: lift particles off with a soft repeated press. Dry with a soft, clean, lint-free cloth or low-
pressure compressed air. Remove stuck particles with an unscented tissue or cotton swab moistened with glass
cleaner or distilled water.
4.
Check that the fixture is dry before reapplying power.
Fuse Replacement
This fuse is located in a fuse holder next to the MAINS OUT socket on the connections panel.
To replace a fuse:
1.
Disconnect the fixture from power and allow it to cool for at least 10 minutes.
2.
Unscrew the cap of the fuse holder and remove the fuse. Replace with a fuse of the same size and rating only.
3.
Reinstall the fuse holder cap before re-applying power.
Troubleshooting
Listed below are a few common problems that you may encounter, with solutions.
The fixture does not work, no light
•
Check the connection of power and main fuse. Be sure the external fuse has not blown.
•
Measure the mains voltage on the main connector.
No response to the sound
•
Make sure the fixture does not receive DMX signal.
•
Low frequencies (bass) should cause the unit to react to sound. Tapping on a microphone, quiet or high-pitched
sounds are not activating the unit. Check the sound sensitivity level. Make sure it is not set to a low sensitivity level.
This product is classed as Electrical or Electronic equipment and should not be disposed
with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016. AVSL Group Ltd.
