Qtx TETRAMER, User Manual

Page: 3 / 8

150.451UK User Manual
Control Layout:
1. LCD display
2. Control buttons
3. DMX signal in
4. DMX signal loop out
5. Earth screw, DO NOT REMOVE
6. IEC mains in
Manual control menu:
Press the “menu” button to enter setting menu, press “up” and “down” to navigate through
various setting option, press “enter” to enter desire setting, choose set value by “up” and
“down” button and confirm setting by press “enter”.
Display Mode Press ENTER for setting

DMX address

to


DMX Channel mode

,

,

,

for 6, 12, 14, 27 channel control


Slave mode

= master,

= slave 1,

= slave 2


Auto mode

to

16 pre-programmed auto mode

Sound activation

= sound to light on,

= sound to light off


Microphone sensitivity
  
(0-100% gain)


LED display

= stays on,

= turns off after 10 sec untouched


LED display inverted

/

(normal or inverted display)


Pan reverse

= pan normal direction,

= pan in reversed direction


Tilt reverse

= tilt normal direction,

= tilt in reversed direction


Fixture test sequence Fixture steps through all functions – press MENU to exit


Fixture hours Displays how many hours of use for the fixture


Software version


Unit reset Press enter to reset to factory setting