QUICK TROUBLESHOOTING
If the unit is not functioning properly
◼
Check if main power is on
◼
Check the
fuse hasn’t blo
wn
◼
Check the uni
t isn’t in DMX mode
◼
Check there is fluid in the tank and the pipe is pushed down to the bottom of the bottle
◼
If there is blockage use distilled water or haze machine cleaning fluid
REPLACING FUSE
Disconnect from the main power supply first, then remove the fuse holder above the IEC
Socket to reveal the fuse. Replace the correct fuse rating as stated on lighting or user guide.
Then, lock the fuse holder cover back into place.
GENERAL MAINTENANCE
To maintain optimum performance and minimize wear, the item should be cleaned frequently.
Usage and environment are contributing factors in determining frequency. As a rule, fixtures
should be cleaned after use to avoid dust build-up and blockages, which can result in poor
performances, overheating and breakages. Be sure to power off fixture before conducting
maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust
collected on external vents and internal components. Clean the external case when the fixture
is cold with a dry cloth or tissue and drag dirt and grime to the outside case.
