152.750UK & 152.755UK User Manual
Function Setting
To assign the function of the unit please use the Dipswitch chart, the
functions are as follows; DMX/slave, sound activated and AUTO mode.
Each dipswitch represents a binary value and changing the dipswitches
changes the final value.
Dipswitch #10 is used to set the master or slave mode. Within the master
modes there are sound activated mode and AUTO mode. Slave modes
have DMX and slave mode. Dipswitch #9 is used to set sound activated or
AUTO mode when in master mode.
Troubleshooting
1.
If the power supply indicator
doesn’t
light up and the laser
doesn’t
work, please check the power supply and the input voltage.
2.
If the unit is in stand-alone operation and the power supply
indicator is illuminated but the sound activated indicator
isn’t
then
try the following:
•
Increase the music volume, it may be that the sound is not loud
enough to trigger the laser.
•
Also check if the unit has been set up in slave mode, if so, please
change to master mode.
3.
In Master-slave operation, the slave unit
isn’t
functioning. To fix
this try the following:
•
Ensure there is only one master and other units are in slave mode.
•
Ensure that the unit is being controlled without a DMX controller.
•
Ensure that the power cable is in good condition and all
connections
If you have any other problems with no solution, please contact your
retailer for additional support.
