152.750UK & 152.755UK User Manual
Master-Slave Operation
This mode allows you to link up to 32 units together via DMX without a
controller.
1.
Install the unit(s) in a suitable position.
2.
Choose a unit to function as master mode, set the dipswitch to
select sound activated or AUTO mode.
3.
Set all other units to slave mode and select slave mode on the
dipswitch.
4.
Use standard XLR cables to chain your units together via the XLR
connectors on the rear of the units. For longer cable runs we
suggest a terminator is used at the last fixture.
5.
Turn on all the units, they will reset first and then begin to work.
All slave units will react in the same way as the master unit.
6.
The units will react to any frequency of music/sound via the
internal microphone on the back of the unit.
Universal DMX Operation (DMX Mode)
This mode allows you to use a universal DMX-512 controller to operate.
1.
Install the unit(s) in a suitable position.
2.
Use standard XLR cables to chain your units together via the XLR
connectors on the rear of the units. For longer cable runs we
suggest a terminator is used at the last fixture.
3.
Assign a DMX address to each unit using the dipswitches to select
the correct mode.
4.
Turn on the unit, this will reset first then begin to work afterwards.
5.
Use the DMX controller to control your units.
Notes:
•
DMX controllers cannot be used in Master-Slave operation (Sound
Activated or AUTO mode)
•
There should only be one master unit when using Master-Slave
operation.
