13/19
USER MANUAL
Setting MIDI IN
Action
1) While holding down the
RECORD
button, simultaneously tap to Flash button #1 three times. The
display reads
MIDI CHANNEL IN
to indicate channel setup is available.
2) Select the
MIDI
control channel (1-16)by tapping Flash button 1-16.The relevant channel LED
lights indicating
MIDI IN
channel is est.
3) While holding down
RECORD
, tap the
REC EXIT
button to exit
MIDI
setting.
Notes:
This is the Channel that the controller will receive MIDI note commands.
Notes:
When working with MIDI notes 22-93,you may simulate a faders incease
and decrease by adjusting the velocity of the note.
4) While holding down the
RECORD
button, simultaneously tap Flash button #2 three times. The
display reads
MIDI CHANNEL OUT
to indicate channel setup is available.
5) Select the
MIDI
control channel (1-16)by tapping Flash button 1-16.The relevant lights indicating
MIDI OUT
channel is set.
6) While holding down
RECORD
, tap the
REC EXIT
Button to exit
MIDI
setting.
Notes:
This is the channel that the controller will transmit MIDI note commands.
Setting MIDI OUT
Action
Receiving MIDI File Dump
Action
7) While holding down the
RECORD
button, simultaneously Flash button #3 three times. The
display reads
MIDI FILEDUMP RECVING
000%wen the device is in the correct mode.
MIDI Note
27-69
70-93
94
95
96
97
98
99
100
101
102
Tum on or off program 1-48
Activate Channel 1-24
FULL-ON
DARK(momentary blackout)
HOLD
Tum on or off AUDIO
Chase SCENE
MODE:1-12A-1-12B
MODE:1-24A
Step
BACKOUT
FUNCTION (TURN ON/OFF)
DM X 5 1 2 CON T ROLLER SERI ES
