Qtx 154.091UK, User Manual

Page: 10 / 14

10 154.091UK User Manual
3.5 Scene Programming (Steps)
3.5.1 Insert a Scene
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Select the desired CHASE button
3. Press the TAP/DISPLAY button to switch the display to step view
4. Use BANK UP/DOWN buttons to navigate to the point at which to insert a Scene
5. Press the MIDI/ADD button to prepare to insert a scene
6. Use BANK UP/DOWN buttons to navigate to the scene that is to be inserted
7. Press the SCENE button that corresponds to the scene to be copied
8. Press the MIDI/ADD button to insert the scene. All LEDs will blink to confirm
Note:
To insert a scene between Steps 05 and 06 navigate using BANK buttons until the LCD reads STEP05.
3.5.2 Copy a Scene
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Use BANK UP/DOWN buttons to navigate to the bank containing the Scene to be copied
3. Press the SCENE button that corresponds to the scene to be copied
4. Press the MIDI/ADD button to copy the scene
5. Use BANK UP/DOWN buttons to navigate to the bank that the Scene is to be copied into
6. Press the SCENE button where the Scene is to be copied into. All LEDs will blink to confirm
3.5.3 Delete a Scene
Action:
1. Press and hold the PROGRAM button until the LED blinks
2. Use BANK UP/DOWN buttons to navigate to the bank containing the Scene to be deleted
3. Press and hold the AUTO/DEL button
4. Press the SCENE button that corresponds to the scene to be deleted. All LEDs will blink to confirm
Note: When deleting a scene the physical location is not removed, however, all 192 DMX channels available to
the scene will be set to value 0.
3.5.4 Delete All Scenes
Action:
1. Press and hold the PROGRAM and BANK DOWN buttons whilst switching the power off
2. Turn the DM-X10 back on and all Scenes will be deleted
Caution: This process is irreversible. All scenes with data will be set to 0.